Home › General › MAINTENANCE › REAR TURN SIGNAL LIGHT BULB
RM36W0E _V1 General _088300 MAINTENANCE _0421031 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb as shown in the illustration.


b.
E441646C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket with the rear turn signal light bulb as shown in the illustration to install it.


Hide 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY

a.
E433392C03
1.292,0.542 1.5,0.25 true 0.802,1.052 1.01,0.76 true 1.5,0.083 1.729,0.333 0.229,0.25 10 true *a 0.677,1.052 0.927,1.292 0.25,0.24 10 true *b
*a Pin
*b Guide
V113147

Install in this Direction


Engage the guide and pin to install the rear combination light assembly as shown in the illustration.


b.

Install the 2 screws.


c.

Remove the protective tape.