Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
65632D
1.REMOVE REAR WHEEL HOUSE FRONT PLATE
75852
2.REMOVE ROCKER PANEL MOULDING
Apply protective tape around the rocker panel moulding and doors as shown in the illustration.
|
Protective Tape | - | - |
Remove the 6 clips.
Remove the 6 screws.
Remove the 4 grommets.
Disengage the clips to remove the rocker panel moulding as shown in the illustration.
|
Remove in this Direction | - | - |