Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
68152C
1.DISCONNECT REAR DOOR GLASS RUN LH
Disconnect the rear door glass run LH.
75708
2.REMOVE REAR DOOR WINDOW FRAME MOULDING SUB-ASSEMBLY
Disengage the claw.
Disengage the claw.
| *a | Gap |
Insert a 3 mm hexagon wrench as shown in the illustration.
Using a 3 mm hexagon wrench, disengage the claw to remove the rear door window frame moulding sub-assembly.