CHECK FOR DTC
Check for DTCs.
CLEAR DTC
Clear the DTCs.
ALL READINESS
With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
Clear the DTCs.
Perform the DTC judgment driving pattern to run the DTC judgment.
Enter the following menus: Body Electrical / Air Conditioner / Utility / All Readiness.
| Tester Display |
|---|
| All Readiness |
Input the DTCs to be confirmed.
Check the DTC judgment result.
| GTS Display | Description |
|---|---|
| NORMAL | ·
DTC judgment completed ·
System normal |
| ABNORMAL | ·
DTC judgment completed ·
System abnormal |
| INCOMPLETE | ·
DTC judgment not completed ·
Perform the driving pattern |
If the result is incomplete, perform the judgment driving pattern again and then check the DTC judgment result.