69310
1.INSPECT FRONT DOOR LOCK ASSEMBLY RH
| *a | Component without harness connected
(Front Door Lock Assembly RH) |
| *b | Unlock |
| *c | Neutral |
| *d | Lock |
Check the resistance of the lock and unlock switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| K11-6(L) - K11-8(E) | Lock | Below 1 Ω |
| K11-6(L) - K11-8(E) | Neutral | 10 kΩ or higher |
| K11-5(UL) - K11-8(E) | Unlock | Below 1 Ω |
| K11-5(UL) - K11-8(E) | Neutral | 10 kΩ or higher |
If the result is not as specified, replace the front door lock assembly RH.
| *a | Component without harness connected
(Front Door Lock Assembly RH) |
| *b | Lock |
| *c | Unlock |
Check the door lock motor operation.
Apply auxiliary battery voltage to the motor connector and check the operation of the door lock motor.
| Tester Connection | Specified Condition |
|---|---|
| K11-4(L) - Auxiliary battery positive (+)
K11-1(UL) - Auxiliary battery negative (-) |
Lock |
| K11-1(UL) - Auxiliary battery positive (+)
K11-4(L) - Auxiliary battery negative (-) |
Unlock |
If the result is not as specified, replace the front door lock assembly RH.
Check the operation of the door unlock detection switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| K11-7(LSSR) - K11-8(E) | Lock | 10 kΩ or higher |
| K11-7(LSSR) - K11-8(E) | Unlock | Below 1 Ω |
If the result is not as specified, replace the front door lock assembly RH.
69320
2.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Smart Entry and Start System)
| *a | Component without harness connected
(Front Door Lock Assembly LH) |
| *b | Lock |
| *c | Unlock |
Check the door lock motor operation.
Apply auxiliary battery voltage to the motor connector and check the operation of the door lock motor.
| Tester Connection | Specified Condition |
|---|---|
| L11-4(L) - Auxiliary battery positive (+)
L11-1(UL) - Auxiliary battery negative (-) |
Lock |
| L11-1(UL) - Auxiliary battery positive (+)
L11-4(L) - Auxiliary battery negative (-) |
Unlock |
If the result is not as specified, replace the front door lock assembly LH.
69320
3.INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Smart Entry and Start System)
| *a | Component without harness connected
(Front Door Lock Assembly LH) |
| *b | Lock |
| *c | Unlock |
Check the door lock motor operation.
Apply auxiliary battery voltage to the motor connector and check the operation of the door lock motor.
| Tester Connection | Specified Condition |
|---|---|
| L11-4(L) - Auxiliary battery positive (+)
L11-1(UL) - Auxiliary battery negative (-) |
Lock |
| L11-1(UL) - Auxiliary battery positive (+)
L11-4(L) - Auxiliary battery negative (-) |
Unlock |
If the result is not as specified, replace the front door lock assembly LH.
Check the operation of the door unlock detection switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L11-7(E) - L11-8(LSSR) | Lock | 10 kΩ or higher |
| L11-7(E) - L11-8(LSSR) | Unlock | Below 1 Ω |
If the result is not as specified, replace the front door lock assembly LH.