Home › General › MAINTENANCE › TRANSMITTER BATTERY (w/ Entry and Start System)
RM36W0E _V1 General _088300 MAINTENANCE _0421648 TRANSMITTER BATTERY(w/ Entry and Start System) A

MAINTENANCE  TRANSMITTER BATTERY(w/ Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745C 1.INSTALL TRANSMITTER BATTERY

a.
B576105

Install a new transmitter battery with the positive (+) side facing upward.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.




b.
B566031

Install the transmitter housing cover by pressing down on it as shown in the illustration.


c.
B566032

Insert the mechanical key into the transmitter.


d.

Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when a switch is pressed.