Take extra care when handling these precision electronic components.
89751A
1.INSTALL TRANSMITTER HOUSING COVER
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover.
Do not use excessive force when prying apart the transmitter housing cover.
8975B
2.INSTALL TRANSMITTER BATTERY HOUSING COVER
Remove the transmitter battery housing cover.
89745C
3.REMOVE TRANSMITTER BATTERY
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery.
Do not push the terminals with your finger.
Do not forcibly pry up the transmitter battery as the terminals may be damaged.
Do not touch the transmitter battery with wet hands. Moisture may cause rust.
Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.