Use the same procedure for the LH side and RH side.
The following procedure is for the RH side.
62331A
1.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
| *a | Paint Mark |
| *b | Mark Position |
Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the rear door opening trim weatherstrip as shown in the illustration.
| Location | Color |
|---|---|
| RH Side | Light Blue |
| LH Side | Pink |
Always align the alignment mark with the flange when installing the part. If the alignment mark is not aligned, water ingress may occur.
After installation, check that the corners fit correctly.
To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.
67917F
2.INSTALL REAR DOOR SCUFF PLATE INSIDE
76973F
3.INSTALL REAR UNDER SIDE COVER (for HV Model)
72693
4.INSTALL REAR SEAT CUSHION LOCK HOOK (for Gasoline Model)
5.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
73350C
6.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Gasoline Model)