Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP
RM36W0E _59 Vehicle Exterior _088480 DOOR / HATCH _0421657 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.

Remove any non-drying sealer on the body with non-residue solvent.


b.
B565059C02
0.573,2.906 0.844,3.271 true 0.385,1.125 0.583,0.615 true 1.49,0.958 1.74,0.615 true 2.594,0.177 2.813,0.552 true 1.76,2.969 2.063,3.313 true 0.885,3.219 1.198,3.417 0.313,0.198 10 false *a 0.302,1.146 0.615,1.344 0.313,0.198 10 false *b 1.333,0.99 1.552,1.156 0.219,0.167 10 true *b 2.396,0.031 2.583,0.208 0.188,0.177 10 true *b 2.094,3.229 2.406,3.427 0.313,0.198 10 false *c
*a Paint Mark
*b Mark Position
*c Connecting Portion


Align the paint marks with the positions on the body flange and install a new back door weatherstrip.

Paint Mark:
Location Color
Center Pink
Side White


NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, coolant leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.