Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM36W0E _59 Vehicle Exterior _088480 DOOR / HATCH _0421658 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Entry and Start System)

a.

Check the operation of the back door opener switch.

i.
B567851C01
1.458,0.167 1.958,0.417 0.5,0.25 1.083,1.667 1.417,1.25 true 2.083,1.667 1.75,1.25 true 1.625,0.229 1.938,0.427 0.313,0.198 10 false Y8 0.583,0.333 0.896,0.531 0.313,0.198 10 false *a 0.896,1.667 1.208,1.865 0.313,0.198 10 false UL 2.167,1.667 2.479,1.865 0.313,0.198 10 false E
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Y8-3(UL) - Y8-2(E) Back door opener switch not pushed (OFF) 10 kΩ or higher
Y8-3(UL) - Y8-2(E) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



b.

Check the operation of the back door lock switch.

i.
B567851C02
1.458,0.167 1.958,0.417 0.5,0.25 1.25,1.667 1.667,1.25 true 2.333,1.667 2,1.25 true 1.625,0.229 1.938,0.427 0.313,0.198 10 false Y8 0.604,0.385 0.917,0.583 0.313,0.198 10 false *a 1.094,1.667 1.25,1.865 0.156,0.198 10 false E 2.417,1.667 2.573,1.865 0.156,0.198 10 false L
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Y8-1(L) - Y8-2(E) Back door lock switch not pushed (OFF) 10 kΩ or higher
Y8-1(L) - Y8-2(E) Back door lock switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



Hide 84840G 2.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Entry and Start System)

a.

Check the operation of the back door opener switch.

i.
B567851C01
1.458,0.167 1.958,0.417 0.5,0.25 1.083,1.667 1.417,1.25 true 2.083,1.667 1.75,1.25 true 1.625,0.229 1.938,0.427 0.313,0.198 10 false Y8 0.583,0.333 0.896,0.531 0.313,0.198 10 false *a 0.896,1.667 1.208,1.865 0.313,0.198 10 false UL 2.167,1.667 2.479,1.865 0.313,0.198 10 false E
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Y8-3(UL) - Y8-2(E) Back door opener switch not pushed (OFF) 10 kΩ or higher
Y8-3(UL) - Y8-2(E) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.