Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
71910E
1.REMOVE FRONT SEAT HEADREST ASSEMBLY
Remove the front seat headrest assembly from the front seat assembly.
71074S
2.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Disconnect the rubber band of the separate type front seatback cover.
73240
3.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
73230
4.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
72494A
5.REMOVE FRONT SEAT VERTICAL ADJUSTER HANDLE (for Driver Side)
| *a | Protective Tape |
|
Remove in this Direction |
Operate the front seat vertical adjuster handle and using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the front seat vertical adjuster handle as shown in the illustration.
72551B
6.REMOVE RECLINING HINGE COVER
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to remove the reclining hinge cover as shown in the illustration.
72525A
7.REMOVE RECLINING ADJUSTER RELEASE HANDLE
Disengage the guide to remove the reclining adjuster release handle.
71848A
8.REMOVE SEAT ADJUSTER COVER CAP (for Driver Side)
| *a | Protective Tape |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the seat adjuster cover cap as shown in the illustration.
71811D
9.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)
|
Remove in this Direction (1) |
Disengage the claws.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claws and guides (A) as shown in the illustration.
Disengage the guide (B) to remove the front seat cushion shield as shown in the illustration.
71861
10.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
|
Remove in this Direction |
Disengage the claws.
|
Remove in this Direction |
Disengage the claws and guide to remove the front seat inner cushion shield as shown in the illustration.
71812D
11.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
|
Remove in this Direction |
Disengage the claws.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claws and guide (A) as shown in the illustration.
Disengage the guide (B) to remove the front seat cushion shield as shown in the illustration.
71862
12.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
|
Remove in this Direction |
Disengage the claws.
|
Remove in this Direction |
Disengage the claws and guide to remove the front seat inner cushion shield as shown in the illustration.
13.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Disengage the hooks.
| *1 | Front Seat Airbag Assembly |
| *2 | Front Seat Center Airbag Assembly |
Disengage the claw and clamps to separate the front seat airbag assembly wire harness.
Disengage the clamps to separate the front seat center airbag assembly wire harness.
Remove the 4 bolts.
Disengage the guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.
71930E
14.REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY
Disengage the hooks.
Open the 2 fasteners as shown in the illustration.
|
Remove in this Direction |
Disengage the claws to remove the 2 front seat headrest support assemblies as shown in the illustration.
15.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
|
Remove in this Direction |
Disengage the hook to disconnect the seat cover hanger from the front seatback frame sub-assembly.
Remove the seatback cover hook.
| *a | Hook (A) |
|
Remove in this Direction |
Disengage the hook (A).
| *a | Hook (B) |
|
Remove in this Direction |
Disengage the hook (B) to remove the seat cover hanger.
Remove the separate type front seatback cover with pad from the front seatback frame sub-assembly.
71073S
16.REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)
Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
71073S
17.REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Sports Seat Type)
Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
73910A
18.REMOVE FRONT SEAT AIRBAG ASSEMBLY
739H0
19.REMOVE FRONT SEAT CENTER AIRBAG ASSEMBLY
71053S
20.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY
Disengage the claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.
Disengage the guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.
71587
21.REMOVE FRONT SEATBACK EDGE PROTECTOR
Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.
71759C
22.REMOVE FRONT SEATBACK HOOK
Disengage the claws to remove the 2 front seatback hooks from the front seatback frame sub-assembly.
23.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
for Front Passenger Side:
Disengage the claw to remove the occupant detection sensor connector.
Disengage the hooks (A) and hooks (B) to remove the separate type front seat cushion cover with pad.
71071S
24.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Standard Seat Type)
Using a screwdriver, disengage the claws to remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.
| *a | Screwdriver | - | - |
71071S
25.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Sports Seat Type)
Using a screwdriver, disengage the claws to remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.
| *a | Screwdriver | - | - |
71875F
26.REMOVE SEAT RECLINING ADJUSTER INSIDE COVER RH
Disengage the claws to remove the seat reclining adjuster inside cover RH.
| *A | for Driver Side | *B | for Passenger Side |
71876F
27.REMOVE SEAT RECLINING ADJUSTER INSIDE COVER LH
Disengage the claws to remove the seat reclining adjuster inside cover LH.
| *A | for Driver Side | *B | for Passenger Side |
71873U
28.REMOVE FRONT SEAT LOWER CUSHION SHIELD
Use the same procedure for both sides.
| *a | Hook |
| *b | Guide |
Disengage the hook.
Disengage the claw and guide to remove the front seat lower cushion shield.
71537C
29.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR (for Driver Side)
Disengage the claw to remove the front seat cushion edge protector.
7181A
30.REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER
Remove the 2 screws.
Disengage the claw to remove the front seat cushion wire harness holder.
82667D
31.REMOVE CONNECTOR HOLDER
Disengage the claw to remove the connector holder.
71051A
32.REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY
Disengage the hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.
72211
33.REMOVE SEAT TRACK ADJUSTING HANDLE
Disengage the claws to remove the seat track adjusting handle from the front seat adjuster assembly.
72265
34.REMOVE SEAT TRACK UPPER RAIL COVER
Use the same procedure for both sides.
|
Remove in this Direction |
Disengage the claws to remove the seat track upper rail cover as shown in the illustration.
72125U
35.REMOVE REAR UPPER SEAT TRACK COVER
Use the same procedure for both sides.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the rear upper seat track cover as shown in the illustration.
72497B
36.REMOVE VERTICAL ADJUSTER BRACKET COVER (for Driver Side)
Disengage the claw to remove the vertical adjuster bracket cover.