Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Front Passenger Side) › 2020.03–2020.09
RM36W0E _58 Vehicle Interior _088062 SEAT BELT _0421673 OCCUPANT DETECTION SENSOR(for Front Passenger Side) G

SEAT BELT  OCCUPANT DETECTION SENSOR(for Front Passenger Side)  INSPECTION  


PROCEDURE

Hide 71511S 1.INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD) (for Standard Seat Type)

a.

Check the resistance.

i.
B218574C49
1.5,0.438 1.896,0.698 0.396,0.26 0.146,0.083 0.333,0.26 0.188,0.177 10 false *a 1.656,0.49 1.844,0.667 0.188,0.177 10 false A
*a Component without harness connected
(Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - A-3 Front passenger side seat occupied Below 100 Ω
A-1 - A-3 Front passenger side seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).



Hide 71511S 2.INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD) (for Sports Seat Type)

a.
B218574C50
1.5,0.417 1.917,0.667 0.417,0.25 1.667,0.458 1.823,0.656 0.156,0.198 10 false B 0.167,0.083 0.479,0.281 0.313,0.198 10 false *a
*a Component without harness connected
(Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-1 B-3 Front passenger side seat occupied Below 100 Ω
B-1 B-3 Front passenger side seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).