Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM36W0E _58 Vehicle Interior _088062 SEAT BELT _0421674 FRONT SEAT INNER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.

Check the resistance.

i.
B276694C83
1.469,0.167 1.969,0.417 0.5,0.25 0.99,1.625 1.708,1.188 true 2.542,1.646 1.927,1.188 true 0.094,0.115 0.458,0.417 0.365,0.302 10 false *a 0.865,1.583 1.135,1.813 0.271,0.229 10 false + 2.583,1.573 2.854,1.802 0.271,0.229 10 false E 1.594,0.229 2.052,0.427 0.458,0.198 10 false O17
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O17-3(+) - O17-2(E) Driver side seat belt unfastened 10 kΩ or higher
O17-3(+) - O17-2(E) Driver side seat belt fastened Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly.



Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.

Check the resistance.

i.
B337570C40
1.448,0.25 1.885,0.521 0.438,0.271 1.469,2.708 1.906,2.979 0.438,0.271 0.594,1.854 1.302,1.292 true 0.969,1.865 1.521,1.292 true 2.146,1.875 1.708,1.302 true 2.646,1.865 1.885,1.292 true 0.073,0.063 0.385,0.26 0.313,0.198 10 false *a 1.552,0.302 1.865,0.5 0.313,0.198 10 false O18 1.646,2.771 1.958,2.969 0.313,0.198 10 false A 0.469,1.875 0.625,2.073 0.156,0.198 10 false + 0.875,1.875 1.031,2.073 0.156,0.198 10 false E 2.708,1.875 2.865,2.073 0.156,0.198 10 false E 2.219,1.885 2.375,2.083 0.156,0.198 10 false +
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below (seat belt tension reducer system).

Standard Resistance:
Tester Connection Condition Specified Condition
O18-3(+) - O18-2(E) Front passenger side seat belt unfastened Below 1 Ω
O18-3(+) - O18-2(E) Front passenger side seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly.



b.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below (seat belt warning switch).

Standard Resistance:
Tester Connection Condition Specified Condition
O18-5(+) - A-1 Always Below 1 Ω
O18-4(E) - A-3 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly.