Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for LH Side) › 2020.03–2020.09
RM36W0E _58 Vehicle Interior _088062 SEAT BELT _0421676 REAR SEAT INNER BELT ASSEMBLY(for LH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSPECTION  


PROCEDURE

Hide 73480 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.

for LH:

i.
B276694C85
1.521,0.292 1.938,0.51 0.417,0.219 1.135,1.813 1.375,1.208 true 2,1.813 1.542,1.208 true 0.188,0.135 0.469,0.292 0.281,0.156 10 false *a 0.969,1.875 1.344,2.104 0.375,0.229 10 false LBR+ 1.885,1.865 2.26,2.094 0.375,0.229 10 false LBR- 1.594,0.323 1.969,0.552 0.375,0.229 10 false O20
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O20-5(LBR+) - O20-4(LBR-) Rear seat belt LH unfastened Below 1 Ω
O20-5(LBR+) - O20-4(LBR-) Rear seat belt LH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.



b.

for CENTER:

i.
B276694C86
1.552,0.323 1.958,0.563 0.406,0.24 2.302,1.875 1.771,1.219 true 2.698,1.74 1.969,1.167 true 0.188,0.135 0.469,0.292 0.281,0.156 10 false *a 2.26,1.927 2.698,2.135 0.438,0.208 10 false CBR+ 2.74,1.76 3.115,1.99 0.375,0.229 10 false CBR- 1.625,0.375 1.906,0.531 0.281,0.156 10 false O20
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O20-3(CBR+) - O20-2(CBR-) Rear seat center belt unfastened Below 1 Ω
O20-3(CBR+) - O20-2(CBR-) Rear seat center belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.