Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for RH Side) › 2020.03–2020.09
RM36W0E _58 Vehicle Interior _088062 SEAT BELT _0421677 REAR SEAT INNER BELT ASSEMBLY(for RH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for RH Side)  INSPECTION  


PROCEDURE

Hide 73380X 1.INSPECT REAR SEAT INNER BELT ASSEMBLY

a.

Check the resistance.

i.
B276694C88
1.531,0.313 1.938,0.531 0.406,0.219 1.063,1.781 1.354,1.198 true 2.406,1.823 1.615,1.188 true 0.094,0.115 0.458,0.417 0.365,0.302 10 false *a 0.844,1.844 1.26,2.063 0.417,0.219 10 false RBR+ 2.427,1.865 2.906,2.094 0.479,0.229 10 false RBR- 1.594,0.354 2.052,0.552 0.458,0.198 10 false O19
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O19-5(RBR+) - O19-4(RBR-) Rear seat belt RH unfastened Below 1 Ω
O19-5(RBR+) - O19-4(RBR-) Rear seat belt RH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly.