Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB › 2020.03–2020.07
RM36W0E _52 Drivetrain _088636 P910 HYBRID TRANSMISSION / TRANSAXLE _0421996 SHIFT LEVER KNOB A

P910 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C432481C01
2.042,1.031 2.229,0.573 true 2.729,1.792 2.823,1.583 true 2.594,1.781 2.854,1.979 0.26,0.198 10 true *a 2.135,0.375 2.396,0.573 0.26,0.198 10 true *b
*a Cutout
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to disconnect the shifting lever knob cover as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.



b.
C432482C01
0.75,1.417 0.927,1.063 true 2.188,1.594 2.448,1.188 true 0.969,0.938 1.281,1.094 0.313,0.156 10 false *a 1.99,1.604 2.177,1.823 0.188,0.219 10 true *b
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.