Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER › 2020.03–2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0422045 BRAKE MASTER CYLINDER A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER  DISASSEMBLY  


PROCEDURE

Hide 47220D 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Mount the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C435045

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



c.

Remove the brake master cylinder body from the vise.


Hide 2.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C435077

Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.


Hide 47230 3.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.