Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER › 2020.03–2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0422045 BRAKE MASTER CYLINDER A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER  REASSEMBLY  


PROCEDURE

Hide 47230 1.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.


Hide 2.INSTALL MASTER CYLINDER RESERVOIR GROMMET

a.
C435076C01
0,0 0,0 false
V100144

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.


b.

Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.


Hide 47220D 3.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Mount the brake master cylinder body in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder body.



b.

Install the brake master cylinder reservoir assembly to the brake master cylinder body.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



c.
C435045

Using a 5 mm pin punch and a hammer, tap in the brake master cylinder ring pin to secure the brake master cylinder reservoir assembly.


d.

Remove the brake master cylinder sub-assembly from the vise.