Home › Drivetrain › K320 (MULTIDRIVE / CVT) › SHIFT PADDLE SWITCH
RM36W0E _52 Drivetrain _087836 K320 MULTIDRIVE / CVT _0422069 SHIFT PADDLE SWITCH G

K320 MULTIDRIVE / CVT  SHIFT PADDLE SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

a.

No. 1 transmission shift switch assembly:

i.
C370677C27
1.448,0.104 1.948,0.354 0.5,0.25 1,1.667 1.417,1.167 true 1.5,1.667 1.667,1.167 true 2.5,1.667 2,1.167 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 0.781,1.667 1.396,1.865 0.615,0.198 10 false ECC1 1.354,1.667 1.969,1.865 0.615,0.198 10 false ECC 2.396,1.667 3.01,1.865 0.615,0.198 10 false SDN 1.656,0.135 1.969,0.292 0.313,0.156 10 false A
*a Component without harness connected
(No. 1 Transmission Shift Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1(SDN) - A-2(ECC) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω
A-1(SDN) - A-2(ECC) "-" (Down shift) shift paddle switch not operated 1 MΩ or higher
A-1(SDN) - A-3(ECC1) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω
A-1(SDN) - A-3(ECC1) "-" (Down shift) shift paddle switch not operated 1 MΩ or higher


If the result is not as specified, replace the No. 1 transmission shift switch assembly.



b.

No. 2 transmission shift switch assembly:

i.
C370677C28
1.448,0.115 1.948,0.365 0.5,0.25 1.5,1.667 1.667,1.167 true 2.167,1.667 2,1.167 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 1.354,1.667 1.969,1.865 0.615,0.198 10 false ECC 2.042,1.667 2.656,1.865 0.615,0.198 10 false SUP 1.667,0.156 1.979,0.313 0.313,0.156 10 false A
*a Component without harness connected
(No. 2 Transmission Shift Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1(SUP) - 2(ECC) "+" (Up shift) shift paddle switch operated and held Below 2.5 Ω
A-1(SUP) - 2(ECC) "+" (Up shift) shift paddle switch not operated 1 MΩ or higher


If the result is not as specified, replace the No. 2 transmission shift switch assembly.