Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA
RM36W0E _56 Audio / Visual / Telematics _088657 PARK ASSIST / MONITORING _0422088 TELEVISION CAMERA A

PARK ASSIST / MONITORING  TELEVISION CAMERA  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly Rear television camera assembly optical axis (Back camera position setting) Parking assist monitor system (Click here)

PROCEDURE

Hide 2.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 86790D 3.REMOVE REAR TELEVISION CAMERA ASSEMBLY

a.
B576126

Disconnect the connector.


b.

Remove the 2 screws.


c.
B576127

Disengage the claws to remove the rear television camera assembly.