Home › Engine / Hybrid System › M15A-FKS (FUEL) › FUEL INJECTOR
RM36W0E _51 Engine / Hybrid System _088660 M15A-FKS FUEL _0422099 FUEL INJECTOR G

M15A-FKS FUEL  FUEL INJECTOR  INSPECTION  


PROCEDURE

Hide 23250 1.INSPECT FUEL INJECTOR ASSEMBLY

NOTICE:

This inspection is for checking the fuel injector assembly for an open or short. Because the fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.


a.
A333795C04
1.083,0.167 1.417,0.333 0.333,0.167 1.521,0.167 1.854,0.333 0.333,0.167 1.938,0.167 2.271,0.333 0.333,0.167 0.156,0.115 0.469,0.271 0.313,0.156 10 false *a 1.146,0.156 1.458,0.313 0.313,0.156 10 false F10 1.573,0.156 1.885,0.313 0.313,0.156 10 false F11 2,0.156 2.313,0.313 0.313,0.156 10 false F12
*a Component without harness connected
(Fuel Injector Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F1-1 - F1-2 20°C (68°F) 1.34 to 1.64 Ω
F2-1 - F2-2 20°C (68°F) 1.34 to 1.64 Ω
F3-1 - F3-2 20°C (68°F) 1.34 to 1.64 Ω


If the result is not as specified, replace the fuel injector assembly.