| *a | Tube |
Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
23221
2.REMOVE FUEL PUMP
Disengage the 4 claws and disconnect the sub-assembly support from the fuel sub-tank sub-assembly.
Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.
Click hereEngine / Hybrid System>M15A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION
Disconnect the connector from the fuel pump.
Disengage the 3 claws, and remove the fuel pump from the No. 1 fuel suction support.
Remove the fuel pump from the sub-assembly support.
Remove the O-ring from the fuel pump.