| Fuel pressure | Standard fuel pressure | 284 to 664 kPa (2.9 to 6.8 kgf/cm2, 41 to 96 psi) |
| Fuel pressure: for 5 minutes after engine has stopped | Standard fuel pressure | 98 kPa (1.0 kgf/cm2, 14.2 psi) or more |
| Port fuel injector assembly | Standard resistance | 11.6 to 12.4 Ω at 20°C (68°F) |
| Standard injection volume | 67 to 82 cc (4.1to 5.0 cu.in.) per 15 seconds | |
| Difference between each port fuel injector assembly | 15 cc (0.9 cu.in.) or less | |
| Standard fuel drop | 1 drop or less per 20 minutes |
| No. 2 fuel pressure sensor | Standard voltage | 2 (PFL) - 3 (E2) | Approximately 0.57 to 0.95 V* |
*: The output voltage changes depending on the voltage applied to the terminals.
| Fuel pump | Standard resistance | U - V | 0.05 to 3.0 Ω |
| V - W | 0.05 to 3.0 Ω | ||
| U - W | 0.05 to 3.0 Ω |
| Fuel sender gauge assembly | Standard voltage | 4.255 to 4.605 V (Float level F) |
| 0.345 to 4.605 V (Float level F to E) | ||
| 0.345 to 0.695 V (Float level E) |