Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0422125 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  REMOVAL  


PROCEDURE

Hide 8646C 1.REMOVE FORWARD RECOGNITION CAMERA

Hide 86401 2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
C406701C01
0,0 0,0 false
V100155

Inner Surface of Forward Recognition with Heater Hood Sub-assembly


·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.



a.
A464278C01
2.25,1 2.667,1 true 1.927,1.333 2.26,1.667 2.26,1.667 1.646,1.667 true 2.688,0.896 3,1.052 0.313,0.156 10 false *a 2.333,1.594 2.646,1.75 0.313,0.156 10 false *b
*a Clamp
*b Rib


Disconnect the connector.

NOTICE:

Do not pull the harness forcibly when disconnecting the connector.



b.

Disengage the clamp and 3 ribs.

HINT:

Disengage the clamp and ribs in the order shown in the illustration.



c.
A464279C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.


d.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the forward recognition with heater hood sub-assembly.