Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID (for Intake Side)
RM36W0E _51 Engine / Hybrid System _087499 M15A-FKS ENGINE CONTROL _0422178 CAMSHAFT OIL CONTROL SOLENOID(for Intake Side) G

M15A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID(for Intake Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Inspect the camshaft timing oil control solenoid assembly.

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1 / Data List / Intake VVT Change Angle Bank 1.

Powertrain > Engine > Active Test
Active Test Display
Control the Intake VVT OCV Duty Ratio Bank 1
Data List Display
Intake VVT Change Angle Bank 1
50004 372 4 397

ii.

Read the Data List while performing the Active Test with the engine idling.

OK:
GTS Operation Data List (Intake VVT Change Angle Bank 1)
-100% to 100% Varies by 70 DegFR or more


If the result is not as specified, check the cam timing oil control solenoid assembly, wire harness and ECM.