Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID (for Intake Side)
RM36W0E _51 Engine / Hybrid System _087499 M15A-FKS ENGINE CONTROL _0422178 CAMSHAFT OIL CONTROL SOLENOID(for Intake Side) A

M15A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID(for Intake Side)  REMOVAL  


PROCEDURE

Hide 15370 1.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A463092

Remove the 2 bolts.


b.

Disconnect clamp and remove the engine wire from the engine assembly.


c.
A463090

Disconnect the camshaft timing oil control solenoid assembly connector.


d.

Remove the 2 bolts and camshaft timing oil control solenoid assembly from the No. 2 timing chain cover assembly.

NOTICE:

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.



e.
A388182

Remove the O-ring from the camshaft timing oil control solenoid assembly connector.

NOTICE:
·

If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

·

Do not drop the O-ring into the timing chain cover assembly.