Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID (for Intake Side)
RM36W0E _51 Engine / Hybrid System _087499 M15A-FKS ENGINE CONTROL _0422178 CAMSHAFT OIL CONTROL SOLENOID(for Intake Side) A

M15A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID(for Intake Side)  INSTALLATION  


PROCEDURE

Hide 15370 1.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A388186C02
1.125,0.958 1.99,1.792 1.99,1.792 2.833,0.958 true 1.938,1.823 2.25,1.979 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.

Install the camshaft timing oil control solenoid assembly to the No. 2 timing chain cover assembly with 2 new bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly .




c.

Connect the camshaft timing oil control solenoid assembly connector.


d.

Connect all the connectors and clamps, and install the engine wire to the engine assembly.


e.

Install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 2.INSPECT FOR ENGINE OIL LEAK