After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89667E
1.INSTALL NO. 1 ECM BRACKET
Install the No. 1 ECM bracket to the ECM with the screw.
89668
2.INSTALL NO. 2 ECM BRACKET
Install the No. 2 ECM bracket to the ECM with the 2 screws.
89661
3.INSTALL ECM
Install the bolt and 2 nuts.
Engage the 2 clamps.
| *a | Lock lever |
Connect the 2 ECM connectors and lower the 2 lock levers.
When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
Be sure to securely connect the ECM connectors.
28800
4.INSTALL BATTERY
5. UPDATE ECU SECURITY KEY
6.PERFORM INITIALIZATION