Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 1)
RM36W0E _51 Engine / Hybrid System _087499 M15A-FKS ENGINE CONTROL _0422189 AIR FUEL RATIO SENSOR(for Sensor 1) G

M15A-FKS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 1)  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A459022C07
1.552,0.094 1.969,0.333 0.417,0.24 2.073,1.031 2.458,0.823 true 0.948,0.823 1.417,1.021 true 0.958,1.427 1.406,1.323 true 2.104,1.333 2.573,1.531 true 0.073,0.083 0.396,0.333 0.323,0.25 10 false *a 0.698,1.365 1.021,1.615 0.323,0.25 10 false +B 2.625,1.5 3.25,1.771 0.625,0.271 10 false HA1A 0.625,0.698 1.042,0.938 0.417,0.24 10 false VS+ 2.5,0.708 3.125,0.979 0.625,0.271 10 false IP+ 1.625,0.125 1.948,0.375 0.323,0.25 10 false D40
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D40-4 (HA1A) - D40-5 (+B) 20°C (68°F) 2.5 to 3.0 Ω
D40-1 (IP+) - D40-3 (VS+) Always 1 MΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.