Home › Engine / Hybrid System › M15A-FXE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID
RM36W0E _51 Engine / Hybrid System _087500 M15A-FXE ENGINE CONTROL _0422217 CAMSHAFT OIL CONTROL SOLENOID A

M15A-FXE ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 1.REMOVE ENGINE WIRE

A463093

a.

Remove the 2 bolts.


b.

Disconnect the clamp and remove the engine wire from the engine assembly.


Hide 15370 2.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A463094

Disconnect the cam timing oil control solenoid assembly connector.


b.

Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.

NOTICE:

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.



Hide 41453E 3.REMOVE O-RING

HINT:

Perform this procedure only when replacement of the O-ring is necessary.


a.
A427588

Remove the O-ring from the cam timing oil control solenoid assembly.

NOTICE:
·

When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.

·

If the cam timing oil control solenoid O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.