Home › Engine / Hybrid System › M15A-FXE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 2)
RM36W0E _51 Engine / Hybrid System _087500 M15A-FXE ENGINE CONTROL _0422228 AIR FUEL RATIO SENSOR(for Sensor 2) G

M15A-FXE ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 2)  INSPECTION  


PROCEDURE

Hide 89467C 1.INSPECT NO. 2 AIR FUEL RATIO SENSOR

a.
A401882C10
1.521,0.073 1.938,0.333 0.417,0.26 0.896,1.01 1.354,1.01 true 0.896,1.354 1.354,1.354 true 2.125,1 2.583,1 true 0.073,0.083 0.469,0.333 0.396,0.25 10 false *a 0.677,0.917 1.073,1.167 0.396,0.25 10 false +B 0.521,1.26 1.094,1.51 0.573,0.25 10 false A1B- 2.635,0.906 3.135,1.146 0.5,0.24 10 false HA1B 1.583,0.115 1.979,0.365 0.396,0.25 10 false D41
*a Component without harness connected
(No. 2 Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D41-1 (HA1B) - D41-2 (+B) 20°C (68°F) 2 to 6 Ω
D41-1 (HA1B) - D41-4 (A1B-) Always 10 kΩ or higher


If the result is not as specified, replace the No. 2 air fuel ratio sensor.