Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT › 2020.03–2020.07
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0424496 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  REASSEMBLY  


PROCEDURE

Hide 87220 1.INSTALL AIR DUCT ASSEMBLY

a.
I115668

Install the air duct assembly with the 2 nuts.


b.
I116324

Install the front panel silencer as shown in the illustration.


Hide 88501 3.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.
I115710

Install the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor to the upper heater case.


b.
I115709

Engage the guides and claws to install the upper heater case with No. 1 cooler evaporator sub-assembly to the lower heater case.


c.

Install the 2 screws.


d.
I115708

Engage the guides and clamp.


Hide 87107A 4.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
I115711

Install the heater radiator unit sub-assembly as shown in the illustration.


Hide 87124B 5.INSTALL HEATER CLAMP

a.
I115706

Engage the claws to install the heater clamp.


Hide 87114B 6.INSTALL HEATER COVER

a.
I115705

Install the heater cover with the screw.


Hide 55909A 7.INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
I115712C01
0.635,0.625 0.948,0.823 0.313,0.198 10 false *a 2.146,3.104 2.375,3.323 0.229,0.219 10 true *a 1.156,2.052 1.469,2.25 0.313,0.198 10 false *b
*a MAX COLD
*b MAX WARM


Set the cable gear and unit gear to the MAX COLD position.


b.

Engage the guides and claws to install the air mix damper control cable sub-assembly.

I116110


Hide 55906A 8.INSTALL DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
I115713C01
0.385,2.323 0.698,2.521 0.313,0.198 10 false *a 0.229,1.615 0.542,1.813 0.313,0.198 10 false *b 0.927,2.542 1.156,2.729 0.229,0.188 10 true *a
*a FACE
*b 45°


Set the cable gear and unit link to the FACE position.


b.

Engage the guides and claws to install the defroster damper control cable sub-assembly.

I116109


Hide 87050C 9.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.

Move the gear of the air conditioner radiator assembly so that the shape of the center gear portion of the air conditioner radiator assembly is aligned with the sensor shaft and output shaft of the No. 1 air conditioning radiator damper servo sub-assembly, and temporarily install the No. 1 air conditioning radiator damper servo sub-assembly as shown in the illustration.

I116325C01
2.031,1.135 5.76,0.354 5.76,0.354 6.333,0.885 true 2.573,1.51 4.281,2 4.281,2 5.323,1.229 true 5.792,0.219 6.104,0.375 0.313,0.156 10 false *a 4.219,2.052 4.531,2.208 0.313,0.156 10 false *a
*a Align shapes - -



b.
I115698

Install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 87130D 10.INSTALL BLOWER ASSEMBLY

Hide 88650N 11.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

a.

Engage the guide to temporarily install the air conditioning amplifier assembly as shown in the illustration.

I116326


b.

Install the air conditioning amplifier assembly with the screw.


Hide 82210K 12.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)

a.
I116321

Engage the guides.


b.

Connect 4 connectors to install the air conditioning harness assembly.


Hide 88539J 13.INSTALL DRAIN COOLER HOSE

a.
I115697

Install the drain cooler hose.


Hide 88482A 14.INSTALL COVER

a.
I115774

Engage the claws to install the cover.


Hide 87211A 15.INSTALL NO. 2 AIR DUCT

a.
I115695

Engage the claws to install the No. 2 air duct.


b.

Install the screw.


Hide 88897P 16.INSTALL ASPIRATOR

a.
I116320

Engage the claws and guide to install the aspirator.


Hide 88515 17.INSTALL COOLER EXPANSION VALVE

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

for Gasoline Model:

ND-OIL 8 or equivalent

for HV Model:

ND-OIL 11 or equivalent



b.

Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.
I115692

Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 88899L 18.INSTALL COOLING UNIT PARTS

a.
I115691

Install the cooling unit parts.


Hide 55990B 19.INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY

a.
I116319

Engage the guides and claws to install the lower defroster nozzle assembly.