55480D
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55406B
2.REMOVE INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY
Disengage the clips to separate the instrument cluster finish lower center panel sub-assembly.
Disconnect the 3 connectors.
Disengage the claws to remove the instrument cluster finish lower center panel sub-assembly.
55902E
3.REMOVE NO. 2 HEATER CONTROL SUB-ASSEMBLY
Disengage the claws to remove the No. 2 heater control sub-assembly.
55903A
4.REMOVE NO. 3 HEATER CONTROL SUB-ASSEMBLY
Disengage the claws to remove the No. 3 heater control sub-assembly.
Before removing the No. 3 heater control sub-assembly, make sure to set it to MAX COLD.
55901D
5.REMOVE NO. 1 HEATER CONTROL SUB-ASSEMBLY
Disengage the claws to remove the No. 1 heater control sub-assembly.
Before removing the No. 1 heater control sub-assembly, make sure to set the mode switch to FACE.