Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088063 WIPER / WASHER _0424525 FRONT WIPER MOTOR A

WIPER / WASHER  FRONT WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 85292B 1.REMOVE FRONT WIPER ARM HEAD CAP

a.
E427602C02
0.969,1.281 1.385,0.865 true 0.781,1.271 0.948,1.438 0.167,0.167 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the claws to remove the front wiper arm head cap.

HINT:

Use the same procedure for the RH side and LH side.



Hide 2.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

a.
E427603

Remove the nut and front wiper arm and blade assembly RH.


Hide 3.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

a.
E427604

Remove the nut and front wiper arm and blade assembly LH.


Hide 53867 4.REMOVE FRONT FENDER TO COWL SIDE SEAL LH

a.
E427605

Disengage the claws and guide.


b.
E427606C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guides to remove the front fender to cowl side seal LH as shown in the illustration.


Hide 53866 5.REMOVE FRONT FENDER TO COWL SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.


Hide 55708 6.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

a.

Remove the 2 clips.

E433309C01
0,0 0,0 false
V113147

Remove in this Direction - -



b.

Disconnect the washer hose.


c.

Disengage the claws and guides to remove the cowl top ventilator louver sub-assembly as shown in the illustration.


Hide 7.REMOVE WINDSHIELD WIPER MOTOR AND LINK

a.
E427609

Remove the 2 bolts.


b.
E427610C03
1.083,0.875 0.906,0.917 true 2.625,0.896 2.354,0.958 true 1.115,0.792 1.302,0.938 0.188,0.146 10 true *a 2.146,0.885 2.333,1.031 0.188,0.146 10 true *a
*a Motor Grommet


Disengage the motor grommet as shown in the illustration.

NOTICE:

Be careful not to damage the windshield glass when removing the windshield wiper motor and link.



c.
E427611

Disconnect the connector to remove the windshield wiper motor and link.


Hide 85110 8.REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

a.
E427612C03
2,1.594 1.698,1.219 true 2.49,0.583 2.01,0.938 true 1.833,0.365 1.354,0.719 true 2.521,0.51 2.833,0.667 0.313,0.156 10 false *b 2.042,1.542 2.354,1.698 0.313,0.156 10 false *a 1.865,0.281 2.177,0.438 0.313,0.156 10 false *1
*1 No. 1 Windshield Wiper Link Rod
*a Protective Tape
*b Pivot of Windshield Wiper Motor Assembly


Using a screwdriver with its tip wrapped in protective tape, separate the No. 1 windshield wiper link rod from the pivot of the windshield wiper motor assembly as shown in the illustration.


b.
E427613

Using a T30 "TORX" socket wrench, remove the 2 screws.


c.

Disengage the guides to remove the windshield wiper motor assembly.