Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.
85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY
Check the LO operation.
| *a | Component without harness connected
(Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → A43-5 (+1)
Auxiliary battery negative (-) → A43-4 (E) |
Motor operates at low speed |
If the result is not as specified, replace the windshield wiper motor assembly.
Check the HI operation.
| *a | Component without harness connected
(Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → A43-3 (+2)
Auxiliary battery negative (-) → A43-4 (E) |
Motor operates at high speed |
If the result is not as specified, replace the windshield wiper motor assembly.