Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM36W0E _59 Vehicle Exterior _088063 WIPER / WASHER _0424526 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.

Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.
E427638C02
1.594,2.552 1.854,2.75 true 1.292,2.292 1.406,2.469 0.115,0.177 10 true A 1.885,2.76 2.083,2.938 0.198,0.177 10 true *a 1.281,2.594 1.396,2.771 0.115,0.177 10 true A
*a Alignment Mark


Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 20 mm (0.787 in.)


OK:

The rear wiper stops at the position shown in the illustration.