85110R
1.INSTALL REAR WIPER MOTOR ASSEMBLY
Check that the rear wiper motor assembly operates.
Check that the body ground is connected.
| *a | Component without harness connected
(Rear Wiper Motor Assembly) |
Apply auxiliary battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Y5-4 (+B)
Auxiliary battery negative (-) → Y5-3 (LS) Auxiliary battery negative (-) → Y5-5 (E) |
Motor operates |
If the result is not as specified, replace the rear wiper motor assembly.