Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088063 WIPER / WASHER _0424530 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  REMOVAL  


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

NOTICE:

Removing the lower steering column cover in the incorrect order will cause the parts to break.


a.

Release the tilt and telescopic lever and fully extend and lower the steering column assembly.


b.

Lock the tilt and telescopic lever.


c.
E427648

Turn the steering wheel assembly to the left and remove the screw.


d.
E427649

Turn the steering wheel assembly to the right and remove the screw.


e.
E427650

Remove the screw.


f.
E427651C02
0,0 0,0 false
V100135

Push


Disengage the claws to remove the lower steering column cover as shown in the illustration.


Hide 45286B 2.REMOVE UPPER STEERING COLUMN COVER

a.
E427652

Disengage the claw to remove the upper steering column cover.


Hide 84650 3.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

a.

Turn the steering wheel assembly to the left.


b.
E427653C02
1.969,1.333 2.188,1.521 true 2.219,1.448 2.385,1.604 0.167,0.156 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the windshield wiper switch assembly as shown in the illustration.

NOTICE:

If the claw is pulled with excessive force, it may break.