84650
1.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
Check the resistance.
| *a | Component without harness connected
(Windshield Wiper Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z5-11 (MIST) -z5-4 (E) | MIST position | Below 1 Ω |
| z5-11 (MIST) -z5-4 (E) | Except MIST position | 10 kΩ or higher |
| z5-15 (W_OFF) - z5-4 (E) | OFF position | Below 1 Ω |
| z5-15 (W_OFF) - z5-4 (E) | Except OFF position | 10 kΩ or higher |
| z5-12 (+S) - z5-4 (E) | INT position | Below 1 Ω |
| z5-12 (+S) - z5-4 (E) | Except INT position | 10 kΩ or higher |
| z5-14 (+1) - z5-4 (E) | LO position | Below 1 Ω |
| z5-14 (+1) - z5-4 (E) | Except LO position | 10 kΩ or higher |
| z5-13 (+2) - z5-4 (E) | HI position | Below 1 Ω |
| z5-13 (+2) - z5-4 (E) | Except HI position | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z5-10 (WF) - z5-4 (E) | ON position | Below 1 Ω |
| z5-10 (WF) - z5-4 (E) | OFF position | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z5-2 (C1R) - z5-4 (E) | OFF position | 10 kΩ or higher |
| z5-3 (+1R) - z5-4 (E) | OFF position | 10 kΩ or higher |
| z5-2 (C1R) - z5-4 (E) | INT position | Below 1 Ω |
| z5-3 (+1R) - z5-4 (E) | ON position | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| z5-16 (WR) - z5-4 (E) | ON position | Below 1 Ω |
| z5-16 (WR) - z5-4 (E) | OFF position | 10 kΩ or higher |
If the result is not as specified, replace the windshield wiper switch assembly.