Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088063 WIPER / WASHER _0424531 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


a.

Fill the windshield washer jar assembly with washer fluid.


b.
E287656C32
1.438,0.167 1.948,0.417 0.51,0.25 1.115,1.563 1.49,1.156 true 2.292,1.552 1.896,1.167 true 0.188,0.156 0.5,0.313 0.313,0.156 10 false *a 0.99,1.573 1.302,1.729 0.313,0.156 10 false SW 2.281,1.563 2.594,1.719 0.313,0.156 10 false B 1.583,0.219 2,0.417 0.417,0.198 10 false A44
*a Component without harness connected
(Windshield Washer Motor and Pump Assembly)


Check that washer fluid flows from the windshield washer jar assembly.

OK:
Front Washer
Measurement Condition Specified Condition
Auxiliary battery positive (+) → A44-1 (B)
Auxiliary battery negative (-) → A44-2 (SW)
Washer fluid flows from the windshield washer jar assembly

Rear Washer
Measurement Condition Specified Condition
Auxiliary battery positive (+) → A44-2 (SW)
Auxiliary battery negative (-) → A44-1(B)
Washer fluid flows from the windshield washer jar assembly


If the result is not as specified, replace the windshield washer motor and pump assembly.