Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU
RM36W0E _56 Audio / Visual / Telematics _088657 PARK ASSIST / MONITORING _0424555 CLEARANCE WARNING ECU A

PARK ASSIST / MONITORING  CLEARANCE WARNING ECU  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Clearance warning ECU assembly
·

Ultrasonic sensor detection angle

·

Steering angle neutral point

·

Registration of bumper type

·

Ultrasonic sensor detection angle registration


·

TOYOTA parking assist-sensor system

·

Parking support brake system


(Click here)
Update ECU security key Vehicle control history (RoB) are stored (Click here)

PROCEDURE

Hide 64715C 1.REMOVE DECK SIDE TRIM COVER LH

HINT:

Use the same procedure as for the RH side.

Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>REMOVAL


Hide 89340A 2.REMOVE CLEARANCE WARNING ECU ASSEMBLY

a.
E437234

Disconnect the connector.


b.

Remove the nut.


c.

Disengage the guide to remove the clearance warning ECU assembly.