After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89340A
1.INSTALL CLEARANCE WARNING ECU ASSEMBLY
Engage the guide.
Install the clearance warning ECU assembly with the nut.
Connect the connector.
64715C
2.INSTALL DECK SIDE TRIM COVER LH
Use the same procedure as for the RH side.
Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>INSTALLATION
3. UPDATE ECU SECURITY KEY
4.PERFORM CALIBRATION