Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SUB RADIATOR
RM36W0E _51 Engine / Hybrid System _087936 HYBRID / BATTERY CONTROL _0424589 SUB RADIATOR A

HYBRID / BATTERY CONTROL  SUB RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Front bumper assembly (Including removal and installation)
·

Ultrasonic sensor detection angle

·

Ultrasonic sensor detection angle registration


Parking support brake system (Click here)

PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

HINT:

The radiator (for inverter coolant) is part of the radiator (for Engine). If the radiator (for inverter coolant) needs to be replaced, replace the radiator assembly.


a.

Remove the radiator assembly.

Click hereEngine / Hybrid System>M15A-FXE (COOLING)>RADIATOR>REMOVAL