04474
1.INSTALL REAR WHEEL CYLINDER KIT
|
Lithium Soap Base Glycol Grease |
Apply lithium soap base glycol grease to 2 new wheel cylinder cups and the 2 pistons.
Install the wheel cylinder cup onto each piston.
Install the compression spring to the wheel brake cylinder assembly.
Install the 2 pistons to the wheel brake cylinder assembly.
Install 2 new wheel cylinder boots to the wheel brake cylinder assembly.
47547R
2.TEMPORARILY TIGHTEN REAR DRUM BRAKE BLEEDER PLUG
Temporarily tighten the rear drum brake bleeder plug.
Fully tighten the rear drum brake bleeder plug after bleeding the system.
47548R
3.INSTALL REAR DRUM BRAKE BLEEDER PLUG CAP
Install the rear drum brake bleeder plug cap.