Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for HV Model)
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0420299 AIR CONDITIONING SYSTEM(for HV Model) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for HV Model)  A/C Switch Indicator does not Turn On  


DESCRIPTION

If none of the switch indicators on the air conditioning control assembly illuminate, the following factors may be the cause.

Symptom Factor
A/C switch indicator does not illuminate
·

Air conditioning amplifier assembly malfunction

·

Air conditioning control assembly malfunction

·

A/C switch malfunction

·

A/C switch indicator malfunction (including when indicator turned off without switch operation)

·

Servo motor initialization (incomplete)

·

Mechanical locking of damper and damper link

·

Refrigerant pressure is extremely low

·

Low detected ambient temperature (including thermistor assembly malfunction)



PROCEDURE

1.CHECK MALFUNCTION STATUS
a.

Check the malfunction status of switch indicators on the air conditioning control assembly.


Result:
Result Proceed to
Indicators are not always illuminated A
Indicators are not illuminated only immediately after starting the engine B



A

2.READ VALUE USING GTS

B

2.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Room Temperature Sensor Cooler (room temp. sensor) thermistor Min.: -327.68°C(-557.82°F)
Max.: 327.67°C(621.81°F)
Actual cabin temperature displayed Cooler (room temp. sensor) thermistor circuit malfunction
Body Electrical > Air Conditioner > Data List
Tester Display
Room Temperature Sensor
50003 450 100
OK:

The value displayed is 0°C (32°F) or higher.



Result:
Proceed to
OK
NG



OK

NG

GO TO OTHER DIAGNOSIS PROCEDURE (Ambient Temperature Display System)