DESCRIPTION
When a pre-collision system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle state as Freeze Frame Data.
CHECK FREEZE FRAME DATA
According to the GTS display, select a DTC that stored freeze frame data.
Read the freeze frame data recorded when the DTC was stored.
LIST OF FREEZE FRAME DATA
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | - | Cannot be used |
| PCS Function ON/OFF State | Status of the pre-collision system OFF switch | ON / OFF | ON: Pre-collision system enabled
OFF: Pre-collision system disabled |
- |
| PBA Request | Pre-collision brake assist operation status (While a control command is present, assist control operates when the driver depresses the brake pedal.) | Not PBA Request / PBA Standby Request / PBA Request Level 1 / PBA Request Level 2 | Not PBA Request: Pre-collision brake assist not requested
PBA Standby Request: Low pre-collision brake assist requested PBA Request Level 1: Medium pre-collision brake assist requested PBA Request Level 2: High pre-collision brake assist requested |
The value changes in accordance with the possibility of a collision. This item indicates the pre-collision brake assist standby status. Whether pre-collision brake assist is applied or not is determined by the depression of the brake pedal. |
| VGRS Activation Request | VGRS control activation start | Not Request / VGRS 1 Request / VGRS 2 Request / VGRS 3 Request | Not Request:
VGRS 1 Request: Request 1 VGRS 2 Request: Request 2 VGRS 3 Request: Request 3 |
This item is displayed on the GTS for vehicles without the VGRS system, but cannot be used |
| Warning Brake Request | Warning brake operational status | ON / OFF | ON: Operating
OFF: Not operating |
- |
| FPB Request | for Gasoline Model:
Skid control ECU (brake actuator assembly) PCS brake request (pre-braking) for HV Model: Skid control ECU (brake booster with master cylinder assembly) PCS brake request (pre-braking) |
ON / OFF | ON: Operating
OFF: Not operating |
- |
| PB Request | Pre-collision brake request status | ON / OFF | ON: Operating
OFF: Not operating |
- |
| AVS Control Request | AVS control activation status | ON / OFF | ON: AVS control activated
OFF: AVS control not activated |
This item is displayed on the GTS for vehicles without AVS, but cannot be used |
| Prefill | for Gasoline Model:
Skid control ECU (brake actuator assembly) PCS brake assist standby for HV Model: Skid control ECU (brake booster with master cylinder assembly) PCS brake assist standby |
ON / OFF | ON: Operating
OFF: Not operating |
- |
| PBR Request | PBR operation status | ON / OFF | ON: Operating
OFF: Not operating |
- |
| PBH Request | PBH operation status | ON / OFF | ON: Operating
OFF: Not operating |
- |
| LPB Request | LPB operation status | ON / OFF | ON: Operating
OFF: Not operating |
- |
| PCS PBA Invalid | Pre-collision brake assist function status | ON / OFF | ON: Pre-collision brake assist function invalid
OFF: Pre-collision brake assist function valid |
- |
| PCS Warning Buzzer Invalid | PCS warning buzzer status | ON / OFF | ON: PCS warning buzzer function invalid
OFF: PCS warning buzzer function valid |
- |
| PCS PB Invalid | PCS brake function status | ON / OFF | ON: PCS brake function invalid
OFF: PCS brake function valid |
- |
| Acceleration Suppression at Low Speed (A Control) Invalid | Acceleration suppression at low speed (A control) invalid status | ON / OFF | ON: Acceleration suppression at low speed (A control) function invalid
OFF: Acceleration suppression at low speed (A control) function valid |
Cannot be used |
| Emergency Steering Assist Invalid 1 | Emergency Steering Assist Invalid 1 status | ON / OFF | ON: Emergency steering assist invalid 1 function invalid
OFF: Emergency steering assist invalid 1 function valid |
Cannot be used |
| Emergency Steering Assist Invalid 2 | Emergency Steering Assist Invalid 2 status | ON / OFF | ON: Emergency steering assist invalid 2 function invalid
OFF: Emergency steering assist invalid 2 function valid |
Cannot be used |
| PCS Warning Display Request | PCS warning message status | Not Request / PCS Warning Display 1 Request / PCS Warning Display 2 Request / PCS Warning Display 3 Request | Not Request: Not displayed
PCS Warning Display 1 Request: Displayed PCS Warning Display 2 Request: Not used PCS Warning Display 3 Request: Not used |
"BRAKE!" is displayed on multi-information display |
| PCS Warning Buzzer Request | PCS meter buzzer operation status | ON / OFF | ON: Sounding
OFF: Not sounding |
- |
| PCS Function ON/OFF State Stored | Pre-collision system on/off setting when the pre-collision system is turned off and the ignition switch is turned off and then to ON. | Stored / Not Stored | Stored: PCS function remains OFF
Not Stored: PCS function resets to ON |
"PCS Function ON/OFF State Stored" is a customizable item which can be set using the GTS. |
| PCS Warning Timing State Stored 2 | Sensitivity setting when the pre-collision system is turned on and the ignition switch is turned off and then to ON. | Stored / Not Stored | Stored: Warning sensitivity is maintained at the previous value
Not Stored: Warning sensitivity resets to "Mid" |
"PCS Warning Timing State Stored 2" is a customizable item which can be set using the GTS. |
| PCS Warning Timing State Stored 3 | Sensitivity setting when the pre-collision system is turned off and the ignition switch is turned off and then to ON. | Stored / Not Stored | Stored: Warning sensitivity is maintained at the previous value
Not Stored: Warning sensitivity resets to "Mid" |
"PCS Warning Timing State Stored 3" is a customizable item which can be set using the GTS. |
| PCS Warning Timing State Stored 1 | Sensitivity setting of the pre-collision system when the pre-collision system is turned off and the then on with the ignition switch ON. | Stored / Not Stored | Stored: Warning sensitivity is maintained at the previous value
Not Stored: Warning sensitivity resets to "Mid" |
"PCS Warning Timing State Stored 1" is a customizable item which can be set using the GTS. |