for Gasoline Model:
The stop light switch and skid control ECU (brake actuator assembly) output stop light signals. If the skid control ECU (brake actuator assembly) detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.
for HV Model:
The stop light switch and skid control ECU (brake booster with master cylinder assembly) output stop light signals. If the skid control ECU (brake booster with master cylinder assembly) detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C142571 | Stop Light Relay Actuator Stuck | for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake actuator assembly) for 1 second or more. for HV Model: When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake booster with master cylinder assembly) for 1 second or more. |
Electronically controlled brake system |
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| for Gasoline Model | A |
| for HV Model | B |
A
B
If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT
If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT