1.INSTALL AUXILIARY BATTERY
Temporary install the auxiliary battery.
Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.
Engage the 2 claws to close the connector cover.
Move the auxiliary battery to the installation position.
Connect the battery hose to the auxiliary battery.
Install the No. 2 battery clamp with the bolt.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.
76973F
3.INSTALL REAR UNDER SIDE COVER RH
Engage the guides and clips to install the rear under side cover RH.
Install the 2 clips.
4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function thatcompletes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART