CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Wireless Control Function | Function that turns the wireless door lock control system on or off | Enable | $00:Disable,$01:Enable | |
| Hazard Answer Back Function | Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. | Enable | $00:Disable,$01:Enable |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: SETUP / Vehicle / Vehicle customisation / Door lock settings.
Select the setting by referring to the table below.
| Display | Content | Default | Setting | Relevant ECU |
|---|---|---|---|---|
| Lock/unlock feedback lights | Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. | On | On or Off | Main body ECU (Multiplex network body ECU) |