When the ECM detects that it is not functioning normally, DTC P160700 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| P160700 | Cruise Control Input Processor | When the ignition switch is ON and control of vehicle speed by the dynamic radar cruise control system is prohibited by the sub-CPU, the dynamic radar cruise control system operates for 0.3 seconds or more. | ECM | Radar Cruise1 |
Before replacing the ECM, refer to Service Bulletin.
Read the freeze frame data using the GTS. When a malfunction is detected, various engine control parameters are stored as freeze frame data and can be useful for troubleshooting.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC P160700 is not output | A |
| DTC P160700 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B